If services such as OTU1 are input to a board, you need to configure the service mode of the board.
Prerequisites
- You are user with Operator Group authority or higher.
- Applicable boards: 11TOM, 12LQMD, 12LQMS, 12TQM, 13LQM, 52TOM, 54TOA and 54THA.
NOTICE: Procedure
- In the NE Explorer, select the desired board and choose from the Function Tree.
- Click By Card/Channel, and then choose Channel from the drop-down list.
- Select the Basic Attributes tab, and then select the desired optical interface. Double-click the Service Mode field, and then choose the desired service mode from the drop-down list.
- Click Apply.