The attributes of Ethernet interfaces need to be configured when Ethernet boards are configured with services or used for tests. You can configure the internal ports (VCTRUNK ports) for an Ethernet board.
Background Information
NOTICE: To ensure the availability of an end-to-end Ethernet service, make sure that the port attributes of the Ethernet boards at the two ends of the services are the same.
Procedure
- In the NE Explorer, select an Ethernet board and select in the Function Tree. Select the Internal Port option button.
- Click the Basic Attributes tab. To view the port attribute, click Query. Set the parameters according to the actual requirements and click Apply.
- Click the TAG Attributes tab and set the TAG. Click Apply.
- Click the Network Attributes tab and set the Port Type of the internal port.
NOTE: - In the case of UNI, the port processes the TAG attribute of 802.1Q and the port is with the Tag Aware/Access/Hybrid attribute.
- In the case of C-Aware, the port does not process the TAG attribute of 802.1Q. It determines that the data packet carries C-VLAN tag and processes the data packet based on the C-VLAN tag.
- In the case of S-Aware, the port does not process the TAG attribute of 802.1Q. It determines that the data packet carries S-VLAN tag and processes the data packet based on the S-VLAN tag.
- Click the Advanced Attributes tab and set the port attribute. Click Apply.
NOTE: - The Advanced Attributes tab is available for the 11LEX4, 11LEM24, TBE boards only.
- Broadcast packet suppression is based on the proportion between the broadcast packet and all packets. The value ranges from 10% to 100%, with an increment of 10%.