Configuring TCM Overheads

Procedure

1. In the NE Explorer, select an OTU board and choose Configuration > OTN > TCM Overhead from the Function Tree.
2. Click Query at the right bottom of the interface and query the configuration of the current corresponding overhead.
   NOTE:

   For details about operation differences between the standard and compatibility modes, see the Impacts of the Standard Mode on the U2000 Web LCT.

   
   
   

   NOTE:

   For details about operation differences between the standard and compatibility modes, see the Impacts of the Standard Mode on the U2000 Web LCT.

3. Optional: Select the unit port or channel. Click State > OOS to set the Primary, Secondary State.
4. Double-click the parameter fields to set the parameters.
   NOTICE:

   Configuring the parameter LCK Insertion as ENABLE may interrupt service.

5. Click Apply and the configuration is complete.
6. Optional: Select the unit port or channel. Click State > IS to set the Primary, Secondary State.