Querying and Modifying the Parameters of VLAN SNCP

As for the created protection, the working channel can be queried and the corresponding parameters can be modified on the U2000 Web LCT.

You must be an NM user with "NE operator" authority or higher.

Select the desired Ethernet board in the NE Explorer, and choose Configuration > Ethernet Service > Ethernet Line Service from the Function Tree.
Click Query in the VLAN SNCP Service Management tab. The parameters, such as Revertive Mode and Delay Time (100ms), of the current protection group can be queried.
Optional: Double-click the corresponding parameter field. You can select or enter a new parameter. The parameters, such as Revertive Mode and Delay time (100ms) can be modified.
Click Apply to apply the configuration.
Click Query at the bottom of the interface to query the Current Status, Link Status and Current Channel of the current protection group.
NOTE:
When Revertive Mode is Revertive, Force to Working and Manual to Working are not available.
Select a protection group, and click Set Switching. Select the desired operation in the displayed menu to realize the protection switching.