Setting the Primary, Secondary State

Procedure

1. In the Slot layout, right-click a board and select State. Choose an appropriate state.
   NOTE:

   • IS: Sets the Primary, Secondary State of the boards to be in service.
   • OOS: Sets the Primary, Secondary State of the boards to be out of service. After Primary, Secondary State of the boards is set to OOS, the alarm is no longer reported.
   • AINS: Sets the Primary, Secondary State of the boards to be automatic in service.
   NOTE:

   Before you delete a board, set State of the board to OOS. Then, right-click the board and select Delete.