The route of an intra-board or inter-board service can be established by creating non-protection cross-connection services.
Prerequisites
- Before configuring Level to ODUflex:
- Only synchronization system supports ODUflex service.
- For a line board, set ODU Timeslot Configuration Mode to Assign random IDs. For details, see Configuring Board WDM Interface Attributes.
- For a tributary board, set Port Working Mode to ODUflex Tributary Mode.
- For a tributary-line board, set ODU Timeslot Configuration Mode for WDM interfaces to Assign random and Port Working Mode to ODUflex Tributary Mode.
Background Information
When configuring electrical cross-connection services, ensure that the WDM-side optical path number used at the transmit end is consistent with that at the receive end of a service in the same direction. Otherwise, the service cannot be available.
When you query the WDM service, the WDM service will be updated at the NM from the service data queried at the NE. The status of cross-connections becomes inactive if the cross-connections exist on the U2000 but do not exist on the NE.
- Centralized cross-connections: If the XCS board is configured before cross-connection creation, the cross-connections are realized by the XCS board. In this case, the board to be configured with cross-connections can be installed in any valid slots. In addition, before deleting the XCS board on the U2000 Web LCT, the cross-connections involving the board must be deleted.
- Distributed cross-connections: If no XCS board is configured before cross-connection creation, the board to be configured with cross-connections must be installed in paired slots.
NOTE: Paired slots in the OptiX OSN 6800A are 1&2, 3&4, 5&6, 7&8, 9&10, 11&12, 13&14, and 15&16, however, slot 9&10 are occupied by XCS board.
For the NM port description and items to be configured of each wavelength conversion board, tributary board and line board, refer to the Hardware Description.
Procedure
- When configuring the add and drop services, first configure the service type of the WDM interface of the OTU. For detailed configuration method, refer to Configuring the Service Type.
- Click the NE on the NE Explorer, and choose from the Function Tree.
- Click Query on the bottom of the interface on the right. The fixed cross-connections of the board are displayed on the interface.
NOTE:
The fixed cross-connections of the board cannot be deleted.
- On the Electrical Cross-Connection Configuration interface, click New. The Create Cross-Connection Service dialog box is displayed. Set Service Level, Service Type, and other parameters of the electrical cross-connection services.
NOTE: For details about operation differences between the standard and compatibility modes, see the Impacts of the Standard Mode on the U2000 Web LCT.
- Click OK, and the created cross-connection service is displayed on the interface.
- Optional: Select a service and click Delete. Click OK on the dialog box displayed and the service is deleted.