If a Layer 2 switching network is configured with VLAN unicast, the packets whose sink address is a specified MAC address can be statically forwarded through a specified port in a specified VLAN.
Prerequisites
It applies to the LEM18, 11LEX4, 11LEM24, L4G and TBE board.
EPLAN services must be created.
Precaution
NOTE: Setting the parameters of a port affect the service of the board. Before setting the parameters of a port, configure State of the port as OOS at the Ethernet Interface. After setting the parameters, restore State of the port to IS.
Procedure
- Select the desired Ethernet board on the NE Explorer, and choose from the Function Tree. Click VLAN Unicast tab.
- Click New. In the pop-up Create VLAN Unicast dialog box, double-click the fields of parameters such as VLAN ID, MAC Address and Physical Port. Select or enter the proper values in the fields.
NOTE: VLAN ID: Indicates the created VLAN ID to be used, which is stored in the VLAN filtering table.
MAC Address: Indicates the unicast address.
- Click OK.