Configuration Process

Procedure

1. Set the Working Mode of the 52TOM board. In the NE Explorer, select a 52TOM board, and choose Configuration > Working Mode from the Function Tree. Set Board Working mode to Cascading and then set Port Working Mode to ODU0 tributary-line mode (Any->ODU0->ODU1->OTU1). For details, refer to Configuring the Working Mode of the 52TOM Board.
2. In the Path Views, Set the type of client-side ports 9 (RX7/TX7) and 10 (RX8/TX8) to Line Side Color Optical Port. For details, refer to Modifying Ports.
   NOTE:

   When the 52TOM board is used as a tributary & line board, the Type of this optical interface must be changed to Line Side Color Optical Port.

3. Configure the Service Type at the WDM Interface of the 52TOM. For details, refer to Configuring the Service Type.

4. In the NE Explorer, select the desired board , and choose Configuration > WDM Interface from the Function Tree. Configure the cross-connections from the RX/TX ports to the ClientLP ports on the 52TOM board for the Any services of the board.
   1. Configure the cross-connections from the RX/TX ports to the ClientLP ports on the 52TOM board for the Any services of the board.
      NOTE:

      In this scenario, for Any services, only the FE, GE, FC100, FICON, DVB-AS, DVB-SDI, ESCON, and FDDI services can be accessed.

      Parameters	Value
      Level	ANY
      Service Type	FE
      Direction	Bidirectional
      Source Slot	Shelf2(Subrack2)-15-52TOM
      Source Optical Port	3(RX1/TX1)
      Source Optical Channel (eg.1,3-6)	1
      Sink Slot	Shelf2(Subrack2)-15-52TOM
      Sink Optical Port	201(ClientLP1/ClentLP1)
      Sink Optical Channel (eg.1,3-6)	1

      NOTE:

      The Service Type must be the same as the Service Type at the WDM interface of the 52TOM board.

   2. Repeat 4.a to configure the remaining Any services.
5. Configure two separate cross-connections from the internal logical port to ports 9 (RX7/TX7) and 10 (RX8/TX8) for the 52TOM board to achieve dual feeding.
   1. Configure two separate cross-connections from the internal logical port to ports 9 (RX7/TX7) and 10 (RX8/TX8) for the 52TOM board to achieve dual feeding.

      Parameters	Value
      Level	OTU1
      Service Type	-
      Direction	Bidirectional
      Source Slot	Shelf2(Subrack2)-15-52TOM
      Source Optical Port	51(ODU1LP1/ODU1LP1)
      Source Optical Channel (eg.1,3-6)	1
      Sink Slot	Shelf2(Subrack2)-15-52TOM
      Sink Optical Port	9(RX7/TX7)
      Sink Optical Channel (eg.1,3-6)	1

      Parameters	Value
      Level	OTU1
      Service Type	-
      Direction	Unidirectional
      Source Slot	Shelf2(Subrack2)-15-52TOM
      Source Optical Port	51(ODU1LP1/ODU1LP1)
      Source Optical Channel (eg.1,3-6)	1
      Sink Slot	Shelf2(Subrack2)-15-52TOM
      Sink Optical Port	10(RX8/TX8)
      Sink Optical Channel (eg.1,3-6)	1

      NOTE:

      The working channel port and the protection channel port are the two ports for dual feeding. The service in the working channel must be set as bidirectional, and the service in the protection channel must be set as unidirectional. In this example, port 9 (RX7/TX7) in the working channel port, and port 10 (RX8/TX8) is the protection channel port.

6. Configure the selective receiving feature for the WDM side of the 52TOM board.
   1. In the NE Explorer, select the NE and choose Configuration > Port Protection.
   2. In the Port Protection user interface, click New. In the Confirm dialog box displayed, click OK. The Create Protection Group dialog box displayed. Select Intra-Board 1+1 Protection from the Protection Type. Enter the other parameters of the protection group. For details of parameters, refer to Feature Description.

      Parameters	Value
      Protection Type	Intra-Board 1+1 Protection
      NE with Working Channel	NE8850
      Board with Working Channel	Shelf2(Subrack2)-15-52TOM
      Working Channel	9(RX7/TX7)
      NE with Protection Channel	NE8850
      Board with Protection Channel	Shelf2(Subrack2)-15-52TOM
      Protection Channel	10(RX8/TX8)

   3. Click OK. In the window that is displayed, click Close. The created protection group is displayed in the window.