Configuration Process (In the Service Package Mode)

The configuration in this example can be completed in a one-touch manner after the GE transparent transmission service package is executed.

Background Information

When the service of another type needs to be added through any one of optical interfaces 3-6 of the LQM2, re-configure the interface in the common mode; otherwise, the service is not available.

Procedure

Configuring the add services at station A.
1. Select Configuration > CAM Configuration from the Function Tree.
2. Click Query.
3. Select the GETH bypass service package and click Configure.
4. Click Close on the Operation Result dialog box. Then, click OK on the Confirm dialog box to perform uploading.
5. Click Close on the Operation Result dialog box. Then, the GE bypass service package is configured on NE
  
  NOTE:
  CAM ID: Each service package is assigned with one ID, which cannot be changed.
  
  Detail: Indicates the type of the service package.
Configuring the drop services at station B.
1. Select Configuration > CAM Configuration from the Function Tree.
2. Click Query. Then, click Close on the Operation Result dialog box.
3. Select the GETH bypass service package and click Configure.
4. Click Close on the Operation Result dialog box. Then, click OK on the Confirm dialog box to perform uploading.
5. Click Close on the Operation Result dialog box. Then, the GE bypass service package is configured on NE
Optional: After service packages are configured completely, choose Configuration > Electrical Cross-Connection Service Management from the Function Tree.
Optional: Click Query can query the services that configured.