GUI Parameter Description: Optical Cross-Connection

This section describes the parameters involved in the configuration.

Table 1 lists the parameters involved in optical grooming configuration.

**Table 1** Optical cross-connection parameters
Field	Value	Description
Source Slot	Slot-Board Name	Displays the source slot of the optical cross-connection.
Source Port	Port No.(port name)	Displays the source port of the optical cross-connection.
Source Band	C Band	Currently C band is supported.
Source Wavelength	For example: 2	Numbers wavelengths sequentially. Currently 80 wavelengths in C band are supported.
Sink Slot	Slot-Board Name	Displays the sink slot of the optical cross-connection.
Sink Port	Port No.(port name)	Displays the sink port of the optical cross-connection.
Sink Band	C Band	Currently C band is supported.
Sink Wavelength	For example: 2	Numbers wavelengths sequentially. Currently 80 wavelengths in C band are supported.
Direction	Bidirectional, Unidirectional	If the receive service and transmit service have the same route, they are regarded as a bidirectional service. If the receive service and transmit service have different routes, they are two unidirectional services.
Mode	AUTO, MAN Default: AUTO	Optical cross-connection power adjustment mode. If you select AUTO, the dynamic optical add/drop multiplexing board automatically adjusts the attenuation range of the optical attenuator in the board. If you select MAN, you need to manually adjust the attenuation range of the optical attenuator in the dynamic optical add/drop multiplexing board.
Lockout Status	Unknown, Locked, Unlocked Default: Unlocked	Indicates the lockout status of an optical cross-connection.
Remarks	Character String	Sets extra notes of the NE if desired.