Configuration Networking Diagram

Service Requirement

See Figure 1. The optical NEs (ONEs) A, B, C and D form a ring network, and all the ONEs function as OADM stations.

User1, User2, and User3 communication with each other through one OTU2 service separately. On station A, the 52TOM board accesses four OTU1 services and then converts them into eight ODU0 services. The eight ODU0 services are then sent to two 52NS2 boards according to the actual services requirement. Each 52NS2 board converges the received ODU0 services and other accessed services into one OTU2 service.

Figure 1 Networking diagram for the 52TOM board (ODU1_ODU0 mode in non-cascading mode) in application scenario 8

NOTE:

• The OptiX OSN 8800 T16(NA), OptiX OSN 8800 T32(NA) and OptiX OSN 8800 T64(NA) does not support distributed cross-connection.
• The OptiX OSN 6800A/3800A does not support the ODU0 cross-connection.

Board Configuration Information

In this example, a 52TOM board and two 52NS2 boards should be configured on station A, a 52TOM board and an 52NS2 board should be configured on station B and station D.