Service Package (52TOM)

Typical service configurations can be applied in one-click mode using service package modules. As a result, new deployment commissioning is simplified and the maintenance cost is reduced.

Navigation Path

Choose Configuration > NE Batch Configuration > Service Package Configuration from the main menu.
In the NE Explorer, select the required board and choose Configuration > Service Package from the Function Tree.

Service Package Operation Scenario

Main function of a service package: a user selects a typical service package and issues its commands to configure services.

Status and mode of the system:

Before configuring the service package as Tributary line 7*STM-1/OC3->OTU1 or Tributary line 7*FE->ODU0, select the unit port or channel. Click State > OOS to set the Primary, Secondary State.
Before configuring or replacing a service package, ensure that there is no cross-connection or protection on a 52TOM board.
If a port on a 52TOM board is in tributary-line mode and is set to a WDM-side port, service packages cannot be configured on this board.

Service Package Configuration Specifications

A service package configures services on all boards of an NE according to user instructions by issuing a series of configuration commands, including commands for configuring cross-connections, port types and service types.

Table 1 lists configurations on the 52TOM board.

**Table 1** Configurations on the 52TOM board
Service Package Name	Board Working Mode	Port Working Mode	Service Type	Port Type	Cross-Connection Configuration
Tributary 4*STM-16/OC48->ODU1	Non-cascading mode	Sets Port Working Mode to ODU1 mode (OTU1/Any->ODU1) for ClientLP1, ClientLP3, ClientLP5 and ClientLP7.	Sets Service Type to STM-16/OC48 for channel 1 of ClientLP1, ClientLP3, ClientLP5 and ClientLP7.	-	Creates bidirectional ANY level cross-connections between RX1/TX1-RX4/TX4 and channel 1 of ClientLP1, ClientLP3, ClientLP5 and ClientLP7.
Tributary 8GE->8ODU0	Non-cascading mode	Sets Port Working Mode to ODU0 mode (Any->ODU0[->ODU1]) for ClientLP1, ClientLP3, ClientLP5 and ClientLP7.	Sets Service Type to GE(GFP-T) for channel 1 of ClientLP1-ClientLP8.	-	Creates bidirectional GE level cross-connections between RX1/TX1, RX3/TX3, RX5/TX5 and RX7/TX7 and channel 1 of ClientLP1, ClientLP3, ClientLP5 and ClientLP7. Creates bidirectional GE level cross-connections between RX2/TX2, RX4/TX4, RX6/TX6 and RX8/TX8 and channel 2 of ClientLP2, ClientLP4, ClientLP6 and ClientLP8.
Tributary line 7*STM-1/OC3->OTU1	Cascading mode	Sets Port Working Mode to ODU1 tributary-line mode (OTU1/Any->ODU1->OTU1) for ClientLP1.	Sets Service Type to STM-1/OC-3 for channel 1-7 of ClientLP1.	Sets Port Type to Line Side Color Optical Port for RX8/TX8.	Creates bidirectional ANY level cross-connections between RX1/TX1-RX7/TX7 and channel 1-7 of ClientLP1. Creates bidirectional OTU1 level cross-connections between RX8/TX8 and channel 1 of ODU1LP1.
Tributary line 7*FE->ODU0	Cascading mode	Sets Port Working Mode to DU0 tributary-line mode (Any->ODU0->ODU1->OTU1) for ClientLP1.	Sets Service Type to FE for channel 1-4 of ClientLP1 and channel 5-7 of ClientLP2.	Sets Port Type to Line Side Color Optical Port for RX8/TX8.	Creates bidirectional ANY level cross-connections between RX1/TX1-RX7/TX7 and channel 1-4 of ClientLP1 and channel 5-7 of ClientLP2. Creates bidirectional OTU1 level cross-connections between RX8/TX8 and channel 1 of ODU1LP1.
4*OTU1 REG	Non-cascading mode	Sets Port Working Mode to DU1 tributary-line mode (OTU1/Any->ODU1->OTU1) for ClientLP1, ClientLP3, ClientLP5 and ClientLP7.	Sets Service Type to OTU1 for channel 1 of ClientLP1, ClientLP3, ClientLP5 and ClientLP7.	Sets Port Type to Line Side Color Optical Port for RX5/TX5-RX8/TX8.	Creates bidirectional OTU1 level cross-connections between RX1/TX1-RX4/TX4 and channel 1 of ClientLP1, ClientLP3, ClientLP5 and ClientLP7. Creates bidirectional OTU1 level cross-connections between RX5/TX5-RX8/TX8 and channel 1 of ODU1LP1-ODU1LP4.
Tributary 4*OTU1->ODU1(re-encapsulated into ODU0)	Non-cascading mode	Sets Port Working Mode to ODU1_ANY_ODU0_ODU1 re-encapsulation mode (OTU1->ODU1->Any->ODU0->ODU1) for ClientLP1, ClientLP3, ClientLP5 and ClientLP7.	Sets Service Type to OTU1 for channel 1of ClientLP1, ClientLP3, ClientLP5 and ClientLP7.	-	Creates bidirectional OTU1 level cross-connections between RX1/TX1-RX4/TX4 and channel 1 of ClientLP1, ClientLP3, ClientLP5 and ClientLP7.

NOTE:

For details about configuration commands issued by the service package, refer to Configuration.

Buttons

Button	Description
Synchronize	Before checking whether the service package is configured successfully, clicks Synchronize to synchronize the data from NE to U2000 Web LCT to avoid inconsistencies.