Ethernet Service OAM

In this user interface, you can view, create, delete and modify maintenance points, and start OAM functions.

Navigation Path

In the NE Explorer, select a board and choose Configuration > Ethernet Maintenance > Ethernet Service OAM from the shortcut menu.

Buttons

Button	Description
Query	Queries OAM information from the NE.
New	Creates an MP.
Delete	Deletes the MP.
OAM Operation	Includes options such as Start LB, Start LT, Start Ping, Performance Detect, Activate CC and Deactivate CC.
OAM Configuration	Includes options such as New Maintenance Domain and Maintenance Association.
Apply	Sends the configuration to the NE.

Parameters

Field	Value	Description
Node	Equipment that supports the master and slave shelf management: shelf ID(shelf name)-slot number-board name-port number(port name) Equipment that does not support the master and slave shelf management: slot number-board name-port number(port name)	Displays the current node.
VLAN ID	0 to 4095	Displays the VLAN ID of monitored services.
MP ID	For example: 1F-1F-FF00	Displays the address of the maintenance node (MP).
Type	MEP, MIP	Displays the type of the maintenance node. The maintenance node (MP) includes maintenance terminal point (MEP) and maintenance intermediate point (MIP).
Level	Consumer High (0), Consumer Middle (1), Consumer Low (2), Provider High (3), Provider Low (4), Operator High (5), Operator Middle (6), Operator Low (7)	Displays the level of OAM frames. The smaller the number, the higher the level.
Direction	IP, Bidirectional, WDM	Sets the transmit direction of OAM frames. Select IP and WDM for MEP nodes, and Bidirectional for MIP nodes.
MD	For example: MD1	Displays maintenance domain name.
MA	For example: MA1	Displays maintenance association name.
CC Status	Active, Inactive	Displays whether CC is active.
LB Timeout (ms)	3000 to 60000, in increments of 100 Default: 5000	Displays the LB test timeout.
LT Timeout (ms)	3000 to 60000, in increments of 100 Default: 5000	Displays the LT test timeout.
CCM Sending Period (ms)	1000 to 60000, in increments of 100 Default: 5000	Displays the CCM sending period.
AIS Activation State	Active, Deactive	Displays or sets AIS activation state.
Client Layer Level	1 to 7	Displays or sets client layer level.
AIS Period (ms)	1000,60000	Displays or sets AIS period.
CC Destination Multicast MAC Address	For example: 00-80-C2-00-00-30	Displays or sets CC destination multicast MAC address.

LB Test
You can perform a loopback (LB) check on Ethernet services without interrupting services to check the connectivity of the services for locating and handling faults.
LT Test
You can perform a link trace (LT) check on Ethernet services to check the MIP information in the link for locating and handling faults.
Ping Test
In this user interface, you can set parameters for a ping test, and start or stop a ping test.
Performance Detect
In this user interface, you can set parameters for performance detection, and start or stop performance detection.

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.