Ethernet Test

This user interface is for commissioning of installed Ethernet boards and fault location. You can set the send mode, send direction and the number of test frames to be sent.

Navigation Path

In the NE Explorer, select a board and choose Configuration > Ethernet Maintenance > Ethernet Test from the Function Tree.

Buttons

Button	Description
Clear Counters	Clears the Counters of Test Frame. Clear Counters contain Clear All Counters, Clear Sending Counter, Clear Response Counter and Clear Receiving Counter.

Button

Description

Clear Counters

Clears the Counters of Test Frame.

Clear Counters contain Clear All Counters, Clear Sending Counter, Clear Response Counter and Clear Receiving Counter.

Parameters

**Table 1** Ethernet test (Ethernet data board)
Field	Value	Description
Port/Channel	Equipment that supports the master and slave shelf management: shelf ID(shelf name)-slot number-board name-port number(port name) Equipment that does not support the master and slave shelf management: slot number-board name-port number(port name)	Displays the internal port name.
Send Mode	Disabled, Burst Mode, Continue Mode	Transmitting mode of frames
Send Direction	WDM Direction	Transmitting direction of frames
Frames to Send	0 to 255	The number of the test frames to be sent NOTE: The number of Frames to Send could be slightly different for some equipment.
Status		The status of the test frame sent
Sent Frame Count	For example: 1	Statistics of test frames sent.
Received Response Test Frame Count	For example: 1	Statistics of received response frames
Test Frames to Receive	For example: 1	Statistics of received test frames

**Table 2** Ethernet test (LSC board)
Field	Value	Description
Port	For example: Shelf1(ss)-29-12SLSC-3(RX1/TX1)	Displays the internal port name.
Send Flag	IDLE, BURST, CONTINUOUS	Transmitting mode of frames
Send Direction	SPLTE, SPLTF	Transmitting direction of frames
Test Frame Format	RANDOM, FIXED	Indicates the packet type of test frame.
Test Frames Length	1 to 65535	Indicates the packet length of test frame. The valid value ranges from 1 to 65535, valid when Test Frame Format is FIXED.
Test Frames	1 to 4294967295	Indicates the packet number of test frame. The valid value ranges from 1 to 4294967295, valid when Send Flag is BURST.
Test Status	For example: COMPLD	Queries the status of the test.
Tx Bytes	For example: 0	Statistics of test frames sent.
Tx Error Frames	For example: 0	Statistics of error frames sent.
Rx Bytes	For example: 0	Statistics of received response frames.
Rx Error Frames	For example: 0	Statistics of error received response frames.