In this user interface, you can set parameters for performance detection, and start or stop performance detection.
In the NE Explorer, select an Ethernet board and choose from the Function Tree. Click .
Button |
Description |
|---|---|
Start Detect |
Starts performance detection to send detection packets to the destination maintenance point. |
Stop Detect |
Stops performance detection from sending test packets to the destination maintenance point. |
Field |
Value |
Description |
|---|---|---|
Send Mode |
Burst Mode, Continue Mode |
Specifies a mode in which performance detection packets are sent. |
Packet Length |
64 to 1522 bytes |
Displays the length of a performance detection packet. |
Timeout |
3 to 60 seconds |
Displays the timeout time. |
Detect Attempts |
1 to 1000 times |
The number of attempts to send performance detection packets if you set Send Mode to Burst Mode. If you set Send Mode to Continue Mode, this parameter cannot be edited. |
Source MP ID |
For example: 00-00-0001 |
Displays the ID of the maintenance point that sends detection packets. |
Destination MP ID |
For example: 00-00-0002 |
Displays the ID of the maintenance point that receives detection packets. |
Detail |
- |
The information returned after you perform performance detection. |