In this user interface, you can configure bridge parameters to run the spanning tree protocol.
In the NE Explorer, click the board and select . Click the Bridge Parameter tab.
Field |
Value |
Description |
|---|---|---|
VB |
Format: VB ID-VB Name |
Displays the VB ID and VB name. |
Priority |
0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440 |
Bridge priority, a part of bridge ID. |
MAC Address |
00-00-00-00-00-00 to FE-FF-FF-FF-FF-FF |
Bridge MAC address, a part of bridge ID. |
Max Age (s) |
6 to 40 |
Configures the maximum life cycle of messages. The parameter value must comply with the following rule: 2 x (Hello Time + 1) ≤ Max Age ≤ 2 x (Forward Delay - 1) |
Forward Delay (s) |
4 to 30 |
Configures port status conversion delay. The parameter value must comply with the following rule: 2 x(Hello Time + 1) ≤ Max Age ≤ 2 x (Forward Delay - 1) |
Hello Time (s) |
1 to 10 |
Configures the sending cycle of messages. The parameter value must comply with the following rule: 2 x (Hello Time + 1) ≤ Max Age ≤ 2 x (Forward Delay - 1) |
TxHoldCount (Times/s) |
1 to 10 |
The number of BPDUs that a VB port transmits per second. |