VLAN Group

In this user interface, you can configure a VLAN group. You can assign services that have consecutive CVLANs into a VLAN group. In this way, you configure the VLAN group as a whole in the same way as you configure a single VLAN.

Navigation Path

In the NE Explorer, select a board and choose Configuration > Ethernet Service > Ethernet Line Service from the Function Tree. Click the VLAN Group tab.

Parameters

Field	Value	Description
Board	Equipment that supports the master and slave shelf management: shelf ID(shelf name)-slot number-board name Equipment that does not support the master and slave shelf management: slot number-board name	Displays the name of a board.
Port	For example: PORT3	Choose the port of the VLAN group.
Initial VLAN	For example: 1	Sets and displays the initial VLAN. The value of Initial VLAN ranges from 1 to 4095. The calculation formula is as follows: Initial VLAN = p x (2^n), where n = 0, 1,..., 12, and p is an integer ranging from 1 to 2^m. m + n< = 12.
Last VLAN	For example: 1	Displays the VLAN ID of last the VLAN.
VLAN Group Member Count	For example: 1	Sets and displays the number of members in a VLAN group. The calculation formula of VLAN Group Member CountVLAN depends on the value of Initial VLAN. When Initial VLAN = 1, VLAN Group Member Count = 2^n - 1. When Initial VLAN has another value, VLAN Group Member Count = 2^n, where n is equal to the n in the formula of Initial VLAN. The maximum number of VLAN groups is equal to the number of links on a board.