Rapid Configuration

In this user interface, you can set the parameters of the spanning tree.

Navigation Path

In the NE Explorer, click the board and select Configuration > Layer-2 Switching Management > Spanning Tree. Click Rapid Configuration.

Parameters

Field	Value	Description
VB	VB ID-VB Name	Displays the VB ID and VB name.
Protocol Enabled	Enabled, Disabled Default: Disabled	Protocol enable status.
Protocol Type	STP, RSTP	Sets the protocol type.
Bridge Priority	For example: 32768	Displays the bridge priority. The smaller the value is, the higher the priority is. NOTE: You can input an integer between 0 and 61440. And the increase granularity is 4096.
Port	For example: LP1	Displays the port ID.
Port Priority	For example: 128	Displays or sets the port priority. NOTE: You can input an integer between 0 and 240. And the increase granularity is 16.