In this user interface, you can set parameters for a ping test, and start or stop a ping test.
In the NE Explorer, select an Ethernet board and choose from the Function Tree. Click .
Button |
Description |
|---|---|
Start Ping |
Starts a ping test. |
Stop Ping |
Stops a ping test. |
Field |
Value |
Description |
|---|---|---|
Send Mode |
Burst Mode, Continue Mode |
Specifies a mode in which ping test packets are sent. |
Packet Length |
64 to 1522 bytes |
Displays the length of a ping test packet. |
Timeout |
3 to 60 seconds |
Displays the timeout time. |
Ping Attempts |
1 to 1000 times |
The number of attempts to send ping test packets if you set Send Mode to Burst Mode. If you set Send Mode to Continue Mode, this parameter cannot be edited. |
Destination IP Address |
For example, 129.9.0.123 |
Displays the destination IP address of a ping test packet. |
Local IP Address |
For example, 129.9.0.123 |
Displays the local IP address of a ping test packet. |
Detail |
- |
The information returned after you perform a ping test. |