In this user interface, you can configure port parameters to enable the spanning tree protocol.
In the NE Explorer, select a board and select from the Function Tree. Click the Port Parameter tab.
| Button | Description |
|---|---|
Protocol Transfer |
When the port protocol is changed from STP to RSTP, the port does not transmit RSTP packets immediately. By clicking Protocol Transfer, you can force the port to transmit RSTP packets immediately. |
Field |
Value |
Description |
|---|---|---|
Port |
For example: 1 |
Port ID. |
Priority |
0 to 255 |
Port priority, a part of port ID. The priority must be a multiple of 16. |
Port Path Cost |
1 to 200000000 |
Used for calculating network topology. |
Status |
DISABLE, LISTENING, LEARNING, FORWARDING, BLOCKING, DISCARDING |
Displays the current state of the port. |
Admin Edge Attribute |
Enabled, Disabled |
Admin edge enable status. |
Protocol Enabled |
Enabled, Disabled |
Enables or disables the protocol. |
Auto Edge Detection |
Enabled, Disabled |
Enables or disables a logical port to automatically detect the edge. |