In this user interface, you can view and set NE attributes, including shelf type, and IP address.
In the NE Explorer, select an NE and choose from the Function Tree.
Field |
Value |
Description |
|---|---|---|
Type |
For example: OptiX OSN 8800T 32(NA) |
Displays the type of an NE. |
Name |
For example: NE70 |
Displays the NE name, for the convenience of searching for the NE. |
Location |
Displays the location information of the NE. |
|
Remarks |
Enters extra notes of the NE if desired. |
|
Shelf Type |
For example: NASHELF |
Displays the shelf type of an NE. |
Gateway Type |
IP Gateway |
The gateway type of an NE decides the mode of communication between the NE and the NMS. |
Gateway IP Address |
For example: 10.71.227.149 |
Displays the IP of the gateway NE. |
Gateway Port |
3081 |
Displays the port P of the gateway NE. |
IP Address |
For example: 192.168.0.1 |
Displays the IP of the NE. |
Port |
Default: 3081 |
Displays the port of the gateway NE. |
Daily Monitoring Start Time |
For example: 00:00AM |
Configures the start time of 24-hour performance monitoring. |
Time Zone |
For example: UTC |
Displays the time zone of the NE. |
Daylight Saving Time |
Checked, Unchecked |
Indicates whether to use daylight saving time. |
Auto-Card Installation |
Checked, Unchecked |
Controls the NE to auto identify whether a board is inserted. |
ARP Proxy Enable |
Checked, Unchecked |
Displays whether the ARP Proxy is enable. |
LAN Port Access Control Enable |
Checked, Unchecked |
Displays whether the LAN Port Access Control is enable. |
MAC Address |
For example: 08-00-3e-47-e3-70 |
Displays the MAC Address of an NE. |
Subnet Mask |
For example: 255.255.254.0 |
Displays the Subnet Mask of an NE. |
Gateway |
For example: 129.9.0.1 |
Sets the IP address of the gateway NE. |
Occurring Delay Time (s) |
0 to 6 |
Indicates the duration for the alarm monitoring to persist before the NE reports a newly raised alarm. |
Cleaning Delay Time (s) |
0 to 20 |
Indicates the duration for the alarm monitoring to persist before the NE reports that the alarm is cleared. |
State Mode Level |
Full, Complex |
Sets the level of the state mode on the NE. |
Buzzer |
YES or NOT |
Sets to enable or disable the buzzer on the NE. |
Country Code |
For example: CHN |
Selects to set the country code and national segment code. |
National Segment Code |
For example: 156 |
Displays the national segment code. |
Serial Port Baud Rate (bps) |
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 |
Sets the baud rate of the serial port. |
Serial Port Link Type |
TL1, MML, NM |
Sets the link type of the serial port. |
Serial port Enable |
Checked, Unchecked |
Sets whether the serial port is enable. |
Auto Release Loopback |
YES or NOT |
Sets whether start the auto release loopback function. |
Auto Release Loopback Time |
For example: 00:05 |
Sets the auto release loopback time. |
Power Saving |
Nomal, Saving |
Sets whether start the NE power saving function. |
Outdoor cabinet type |
NULL, APM30 AC, APM30 DC, OMB AC , OMB DC |
Set the type of outdoor cabinet. |
NE Software Version(VRC) |
For example: V100R005C00SPC700 |
Displays the software version of the NE.
|
Created By |
Character string |
Displays the name of the person who creates the NE. |
Created On |
For example: 10/12/2012 14:18:13 |
Displays the time when the NE is created. |