OSPF Parameter

The full name of OSPF is Open Shortest Path First, which is a dynamic routing protocol based on link state.

In this user interface, you can perform the following operations:

In the NE Explorer, click the NE and select Communication > OSPF Parameter from the Function Tree.

Button	Description
Query	Queries the parameters information before setting.
Apply	Sends the configurations to the NE after setting.

Field	Value	Description
Area	For example: 192.168.1.1	Indicates the area ID which is IP format.
Default Route	Yes, No	Specifies whether the default route automatic flooding function is enabled for ASBRs. Default OSPF routes are routes whose destination addresses and subnet masks are 0.
DCC Hello Timer (s)	1 to 255 Default: 1	Indicates the hello timer for DCC interface.
DCC Dead Timer (s)	1 to 65535 Default: 6	Indicates the dead timer for DCC interface.
Import Static	Yes, No	Check box to import the static routing to the OSPF.
LAN Hello Timer (s)	1 to 255 Default: 10	Indicates the hello timer for LAN interface.
LAN Dead Timer (s)	1 to 65535 Default: 40	Indicates the dead timer for LAN interface.
DCC: Not Silence	Yes, No	Sets whether to enable a DCC interface to transmit and receive hello packets.
LAN: Not Silence	Yes, No	Sets whether to enable a LAN interface to transmit and receive hello packets.