Setting Automatic Laser Shutdown

You can enable the automatic laser shutdown function. In the event of a fiber cut, the laser at an optical port is automatically off, to prevent hazardous laser radiation exposure from causing permanent eye damage.

Prerequisites

The optical interface board must be created.

Procedure

In the NE Explorer, click a board and choose Configuration > Automatic Laser Shutdown from the Function Tree.
Set Auto ShutDown to Enabled. Set the On Period (ms), Off Period (ms) and Continuously On-Test Period (ms).

NOTE:
IF Auto ShutDown is set to Disabled, On Period (ms), Off Period (ms) and Continuously On-Test Period (ms) can not be set.
Click Apply. The Operation Result dialog box is displayed indicating that the operation is successful. Click Close.