After an NE is successfully created, it is not configured.
You need to configure the NE first and then the Web LCT can manage
and operate the NE.
Creating NEs
Each actual OptiX series equipment is represented as an NE on the Web LCT. Before the Web LCT manages the actual equipment, you need to create the corresponding NEs on the Web LCT. There are two ways of creating NEs: creating a single NE (including a single shelf) and creating NEs in batches. When you need to create a large number of NEs, for example, during deployment, it is recommended to create NEs in batches. When you need to create just a few NEs, it is recommended to create the NEs one by one. In special situations, for example, when the communication between the Web LCT and the NE is interrupted, you can only choose the mode of creating a single NE.
Logging In to an NE
After an NE is created, you need to log in to the NE before managing the NE.
Adding Boards
When manually configuring the NE data, you need to add boards on the NE Panel. You can either add the physical boards that actually operate on the NE or the logical boards that do not exist on the actual equipment.
Adding Ports Physical ports on some boards can be replaced. This topic describes how to add ports on the U2000 Web LCT based on the actual ports on an NE.
Modifying NEs
You can modify the wrong settings when creating the NEs on the Web LCT. For example, modify the NE Name, delete the board and so on.
Viewing the NE License Information
On the U2000 Web LCT, you can view the accredited capacity of the license and the actual capacity of the RTN NE.