Configuration Process

This section describes the procedures for the data configuration.

Procedure

  1. Create the IF 1+1 protection groups for NE32 to NE33.
    1. Select the corresponding NE from the Object Tree in the NE Explorer. Choose Configuration > IF 1+1 ProtectionTree from the Function.
    2. Click Create. Configure the parameters of the IF 1+1 protection group in the dialog box displayed.

      Parameter

      NE21

      NE24

      Working Mode

      HSB

      HSB

      Revertive Mode

      Revertive mode

      Revertive mode

      WTR Time(s)

      600

      600

      Enable Reverse Switching

      Disabled

      Disabled

      Working Board

      3-ISU2

      4-ISU2

      Protection Board

      5-ISU2

      6-ISU2

  2. Configure the IF/ODU information of the microwave link for NE32 to NE34.
    1. In the NE Explorer, select the NE and then choose Configuration > Link Configuration from the Function Tree.
    2. Click the IF/ODU Configuration tab. Click an IF board icon or ODU icon. Configure the corresponding IF/ODU information of the microwave link.

      Parameter

      NE32

      NE33

      NE34

      IFandODU

      3-ISU2 and 23-ODU

      3-ISU2 and 23-ODU

      4-ISU2 and 24-ODU

      3-ISU2 and 23-ODU

      Link ID

      301

      302

      301

      302

      IF Service Type

      Hybrid(Native E1+ETH)

      Hybrid(Native E1+ETH)

      Hybrid(Native E1+ETH)

      Hybrid(Native E1+ETH)

      IF Channel Bandwidth

      14M

      7M

      14M

      14M

      AM Enable Status

      Enabled

      Enabled

      Enabled

      Enabled

      Modulation Mode of Guaranteed AM Capacity

      QPSK

      QPSK

      QPSK

      QPSK

      Modulation Mode of the Full AM Capacity

      64QAM

      32QAM

      64QAM

      32QAM

      Enable E1 Priority

      Disabled

      Disabled

      Disabled

      Disabled

      Guarantee E1 Capacity

      0

      0

      0

      0

      TX Frequency(MHz)

      14547

      14930

      14967

      14510

      T/R Spacing(MHz)

      420

      420

      420

      420

      TX Power(dBm)

      16

      20

      16

      20

      Power to Be Received(dBm)

      -43

      -48

      -43

      -48

      TX Status

      unmute

      unmute

      unmute

      unmute

  3. Configure the ATPC function for NE32 to NE34.
    1. Select the corresponding board from the Object Tree in the NE Explorer. Choose Configuration > IF Interface from the Function Tree.
    2. Click the ATPC Attributes tab. Set the parameters of ATPC attributes.

      Parameter

      NE32

      NE33

      NE34

      IF and ODU

      3-ISU2 and 23-ODU

      3-ISU2 and 23-ODU

      4-ISU2 and 24-ODU

      3-ISU2 and 23-ODU

      ATPC Enable Status

      Disabled

      Disabled

      Disabled

      Disabled


Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.