Configuration Process

Procedure

1. Create the IF 1+1 protection groups for NE11 to NE15.
   1. Select the corresponding NE from the Object Tree in the NE Explorer. Choose Configuration > IF 1+1 ProtectionTree from the Function.
   2. Click Create. Configure the parameters of the IF 1+1 protection group in the dialog box displayed.

      The values for the relevant parameters of NE11 to NE15 are provided as follows.

      Parameter	NE11	NE12	NE13		NE14	NE15
      Working Mode	HSB	HSB	HSB	HSB	HSB	HSB
      Revertive Mode	Revertive mode	Revertive mode	Revertive mode	Revertive mode	Revertive mode	Revertive mode
      WTR Time(s)	600	600	600	600	600	600
      Enable Reverse Switching	Disabled	Disabled	Disabled	Disabled	Disabled	Disabled
      Working Board	3-IF1	3-IF1	3-IF1	4-IF1	3-IF1	4-IF1
      Protection Board	5-IF1	5-IF1	5-IF1	6-IF1	5-IF1	6-IF1

2. Configure the IF/ODU information of the microwave link for NE11 to NE16.
   1. In the NE Explorer, select the NE and then choose Configuration > Link Configuration from the Function Tree.
   2. Click the IF/ODU Configuration tab. Click an IF board icon or ODU icon. Configure the corresponding IF/ODU information of the microwave link.

      The values for the relevant parameters of NE11 to NE16 are provided as follows.

      Parameter	NE11	NE12	NE13		NE14	NE15		NE16
      IF&ODU	3-IF1 & 23-ODU	3-IF1 & 23-ODU	3-IF1 & 23-ODU	4-IF1 & 24-ODU	3-IF1 & 23-ODU	3-IF1 & 23-ODU	4-IF1 & 24-ODU	3-IF1 & 23-ODU
      Work Mode	7,STM-1,28MHz,128QAM	7,STM-1,28MHz,128QAM	6,16E1,14MHz,16QAM	8,22E1,14MHz,32QAM	6,16E1,14MHz,16QAM	4,8E1,7MHz,16QAM	8,22E1,14MHz,32QAM	4,8E1,7MHz,16QAM
      Link ID	101	101	102	103	102	104	103	104
      TX Frequency(MHz)	14930	14510	14532	14547	14952	14930	14967	14510
      T/R Spacing(MHz)	420	420	420	420	420	420	420	420
      TX Power(dBm)	5	5	10	10	10	15	10	15
      Power to Be Received(dBm)	-42	-42	-44	-43	-44	-48	-43	-48
      TX Status	unmute	unmute	unmute	unmute	unmute	unmute	unmute	unmute

3. Configure the ATPC function for NE11 to NE15.
   1. Select the corresponding board from the Object Tree in the NE Explorer. Choose Configuration > IF Interface from the Function Tree.
   2. Click the ATPC Attributes tab. Set the parameters of ATPC attributes.

      The values for the relevant parameters of NE11 to NE15 are provided as follows.

      Parameter	NE11	NE12	NE13		NE14	NE15		NE16
      IF&ODU	3-IF1 & 23-ODU	3-IF1 & 23-ODU	3-IF1 & 23-ODU	4-IF1 & 24-ODU	3-IF1 & 23-ODU	3-IF1 & 23-ODU	4-IF1 & 24-ODU	3-IF1 & 23-ODU
      ATPC Enable Status	Enabled	Enabled	Enabled	Enabled	Enabled	Enabled	Enabled	Enabled
      ATPC Upper Threshold(dBm)	-32	-32	-34	-33	-34	-38	-33	-38
      ATPC Lower Threshold(dBm)	-52	-52	-54	-53	-54	-58	-53	-58
      ATPC Automatic Threshold Enable Status	Disabled	Disabled	Disabled	Disabled	Disabled	Disabled	Disabled	Disabled