Logging In to an NE

After an NE is created, you need to log in to the NE before managing the NE.

The network communication between the Web LCT and the NE must be normal.

The NE to be managed must be created in the NE list.

NOTE:

The gateway NE corresponding to the NE to be logged in to needs to be added to the Web LCT in advance. Otherwise, NE login may fail.

In the NE List, select the target NE and click NE Login.
NOTE:
You can select more than one NE at one time.

The IE displays the NE Login dialog box.
Enter the User Name and Password. Then, click OK.
- The default User Name is lct.
- The default Password of user lct is password.
NOTE:
User lct has the system level authority.

The Login Status of the NE in the NE List changes to Logged In. Alarm Status of the NE is changed from Unknown to the current alarm status of the NE.
Click NE Explorer.
The NE Explorer is displayed.
NOTE:
To quick start the NE Explorer, double-click the NE to be managed in the NE List.
NOTE:
- Check the legend to learn the specific meanings of different colors and symbols in the slot layout diagram.
- Click to fold/unfold the legend.

Parameter	Value Range	Default Value	Description
User Name	-	lct	Indicates the user name of the NE. In the case of the initial login, you can adopt the default value.
Password	-	-	The default Password of user lct is password.
Use same user name and password to login	Selected or deselected	Deselected	When this parameter is selected, enter the User Name and Password to log in to all the selected NEs.
Use the user name and password that was used last time	Selected or deselected	Deselected	When this parameter is selected, enter the User Name and Password that were used for the latest login to log into the NE.