MP Group Management

MP is a technology used to bind multiple PPP links to increase the bandwidth. MP is applied to the interface that supports PPP. MP supports fragmented packets. The fragmented packets are transmitted on multiple PPP links in the MP group to the same destination.

Guideline

Follow the procedure shown in Figure 1 to configure an MP group.

Figure 1 Procedure for configuring an MP group

• Basic Attributes
  The Multilink PPP, also ML-PPP or MP, indicates that multiple point-to-point protocol (PPP) links are bundled and used. In the case of the ML-PPP, several ports that adopt the PPP encapsulation are bundled into one logical port to increase the transmission bandwidth. The ML-PPP allows that packets be divided into fragments, which are transported over several PPP links to the same destination. In this interface, you can query and set the basic attributes of the MP group.
• Layer 3 Attributes
  In this interface, you can query and set the IP attributes of the MP group.