In this interface, you can query and set the Layer 3 attributes of the PDH interface.
Field |
Value |
Description |
|---|---|---|
Port |
For example: 2-CXPA-5(Port-5) |
Display the port name. |
Enable Tunnel |
Default: Disabled |
The PDH interface does not support setting the Enable Tunnel parameter. |
TE Measurement |
0 to 16777215 |
Sets the TE measurement. You can intervene in the route selection by adjusting the TE measurement of the link. The smaller the value of the TE measurement, the higher the priority of the link. Thus, the traffic congestion of the shortest path that occurs in the traditional route selection can be avoided. |
Admin Group |
0 to 4294967295 |
Sets the admin group. The admin group can specify the link attributes. After the affinity attributes of a dynamic tunnel is configured, when the dynamic tunnel selects links, the dynamic tunnel compares its affinity attributes with the admin attributes of links and determines which links to be avoided. This parameter can be set only when Encapsulation Type in Basic Attributes is set to PPP. |
Specify IP Address |
Manually, Borrow NE IP Address, Borrow Interface IP Address, Unspecified |
Select the means of setting the IP address for the port. This parameter can be set only when Encapsulation Type in Basic Attributes is set to PPP. |
IP Address |
Example: 192.168.0.1 |
Set the IP address for the port. This parameter can be set only when Specify IP Address is set to Manually. |
IP Mask |
Example: 255.255.255.0 |
Set the subnet mask of the port. This parameter can be set only when Specify IP Address is set to Manually. |
Board for Borrowed IP Address |
Example: 2-CXPA |
Select the board for the unnumbered IP address. This parameter can be set only when Specify IP Address is set to Manually. |
Select Board |
Example:3-MD1 |
Select the board. |
Port for Borrowed IP Address |
Example: 2-CXPA-17(100000) |
Display the port for the unnumbered IP address. This parameter can be set only when Specify IP Address is set to Manually. |