Deleting IP Tunnels (PTN Equipment)

If ATM or CES emulation service that travels through an IP network is required, the RTN equipment can use the IP tunnel to carry the service. In this interface, you can create a IP tunnel, query or modify the general attributes of a IP tunnel.

Navigation Path

In the NE Explorer, click the NE and choose Configuration > IP/GRE Tunnel Management > IP Tunnel Management from the Function Tree.

Guideline

The static route must be configured.

Buttons

Button	Description
Delete	To release ports for other services, you can delete redundant IP tunnels. Select an IP tunnel and click Delete. The Confirm dialog box is displayed. Click OK. A dialog box is displayed indicating that the operation is successful. Click Close. NOTE: You are user with Operator Group authority or higher.

Button

Description

Delete

To release ports for other services, you can delete redundant IP tunnels.

Select an IP tunnel and click Delete. The Confirm dialog box is displayed. Click OK. A dialog box is displayed indicating that the operation is successful. Click Close.

NOTE:

You are user with Operator Group authority or higher.

Parameters

**Table 1** Descriptions of the parameters for IP Tunnel Management
Field	Value	Description
Tunnel ID	Example: 5	Set and display the tunnel ID. You can also select the automatic allocation.
Source Board	Example: Slot-Board Name	Set and display the source board.
Source Port	Example: Port (Port No.)	Set and display the source port.
Destination IP	Example: 1.16.0.3	Set and display the LSR ID of the sink NE.
VLAN ID	Example: 5	Set and display the VLAN ID. NOTE: If the created tunnel is carried by VLAN sub-interfaces, VLAN ID cannot be set for the tunnel.
Protection Group	Examle: 1	Display the protection group.