Basic Attributes

In this interface, you can query and set parameters about the Ethernet virtual interface.

Navigation Path

In the NE Explorer, select the NE and choose Configuration > Interface Management > Ethernet Virtual Interface from the Function Tree. Then, click the Basic Attributes tab.

Note

When you create a ADS2, SHD4I or SHD4 logical board, the DSL ports are automatically bound as Ethernet virtual interfaces, which control the Offload service flow and carry tunnels. The Ethernet virtual interface supports the creation of the VLAN sub-interface.

Parameters

**Table 1** Descriptions of the parameters for Ethernet virtual interface Basic Attributes
Field	Value	Description
Port	1 to 2047	Enters a port.
Name	For example: Port1	Enters the self-defined port name.
Port Mode	Layer 2, Layer 3	Displays the port mode of the interface. When Port Type is set to EOA Virtual Interface, you can select the layer at which the port works. When Port Type is set to VLAN Sub Interface, Port Mode can only be set to Layer 3.
Port Type	EoADSL Virtual Interface, EoEFM Virtual Interface, EoATM Virtual Interface, VLAN Sub Interface	Displays the port type of the interface. Selects the type of the port. EOA Virtual Interface: The port can carry the IP tunnel and GRE tunnel. VLAN Sub Interface: The port can carry the MPLS Tunnel, IP tunnel and GRE tunnel.
Associated Board	For example: Slot-Board Name	SelectsDisplays the board where the Ethernet virtual interface is located.
Associated Port	For example: Slot-Board Name-Port (Port No.)	SelectsDisplays the port where the Ethernet virtual interface is located.
VE Group	For example: 1	Displays the VE group to which the Ethernet virtual interface belongs when Port Type is set to VE Interface for the interface.
Aggregated VLAN	1 to 4094	Displays or sets the ID scope of the VLAN to which the Ethernet virtual interface belongs when Port Type is set to VLAN Aggregation Subinterface for the interface.
VPI	0 to 4095	DisplaysSets the VPI used by the Ethernet virtual interface. This parameter is valid only for the EOA virtual interface.
VCI	0 to 65535	DisplaysSets the VCI used by the Ethernet virtual interface. This parameter is valid only for the EOA virtual interface.
AAL5 Encapsulation Type	LLC BRIDGE, LLC ROUTE, VCMUX BRIDGE, VCMUX ROUTE	SelectsDisplays the AAL5 encapsulation type. This parameter is valid only for the EOA virtual interface.
VLAN	1 to 4094	DisplaysSets the VLAN used by the Ethernet virtual interface. This parameter is valid only for the VLAN sub-interface.
MAC Address	For example: 00-E0-4C-76-20-68	Displays the MAC address of the port.
Specify IP	Manually, Unspecified	Selects the means of setting the IP address for the port.
IP Address	For example: 10.70.70.11	Set the IP address of the port. When Port Mode in Basic Attributes is set to Layer 3, you can set this parameter.
IP Mask	For example: 255.255.255.0	Set the IP address mask of the port. When Port Mode in Basic Attributes is set to Layer 3, you can set this parameter.