PW General Attributes

In this interface, you can configure related parameters related to the PW General attributes of the CES service.

Navigation Path

In the NE Explorer, select an NE and choose Configuration > CES Service Management. Then, click the PW General Attributes tab.

Parameters

**Table 1** Descriptions of the parameters for PW General Attributes of CES service management
Field	Value	Description
Protection Type	No Protection, PW Redundancy	Sets the type of protection.
Index	Example: 1	Indicates the PW index. The PW in alarm can be located according to the Monitored Object value.
PW ID	Example: 5	Sets the ID of the PW.
Working Status	Working, Protection	Display the working status.
PW Status	Enabled, Disabled	Sets and display the enable status of the PW. You can right-click a PW and set the enable status of the PW with the shortcut menu.
PW Signaling Type	Static, Dynamic	Sets the PW signal type. If PW Signal Type is set to Static, manually set the PW ingress label and PW egress label. If PW Signal Type is set to Dynamic, the system automatically sets the PW ingress label and PW egress label.
PW Type	CESoPSN, SAToP	Sets the PW type. The CESoPSN is of structuralized emulation, and you can set the timeslot compression for it. The SAToP is of non-structuralized emulation, and you cannot set the timeslot compression for it.
PW Direction	Bidirectional	Displays the direction of a PW.
PW Encapsulation Type	MPLS	Sets the PW encapsulation type. When the PW Encapsulation Type is set to MPLS, the MPLS, IP, and GRE tunnels are supported.
PW Incoming Label	16 to 1048575	Sets the PW ingress label. The PW ingress label is the label attached on the packet header when the TDM frames are encapsulated in the PW. The PW ingress label indicates that the service enters the PW. When the PW Encapsulation Type is set to UDP, the value of the ingress label of PW ranges from 49152 to 65535.
PW Outgoing Label	16 to 1048575	Sets the PW egress label. The PW egress label is the label attached on the packet header when the TDM frames are encapsulated in the PW. The PW egress label indicates that the service exits the PW. When the PW Encapsulation Type is set to UDP, the value of the egress label of PW ranges from 49152 to 65535.
Peer LSR ID	Example: 10.70.71.123	Set the opposite LSR ID of the PW.
Local Operating Status	Example: Up	Displays the local working status.
Remote Operating Status	Example: Up	Displays the remote working status.
Overall Operating Status	Example: Up	Displays the compositive working status. When Local Operating Status and Remote Operating Status are set to Up, Overall Operating Status is Up. When Local Operating Status or Remote Operating Status is set to Down, Overall Operating Status is Down.
Tunnel Type	MPLS, GRE, IP	Sets the type of Tunnel.
Tunnel	Example: 5	Displays the tunnel that carries the PW.
Ingress Tunnel	Example: 55	Sets the tunnel that carries the PW. The tunnel should be configured in advance.
Egress Tunnel	Example: 1	Displays the ID of the egress tunnel.
Deployment Status	Deployed, Undeployed	Display the deployment status of the PW.
Automatic Tunnel Selection Policy	For example: Static MPLS Tunnel	When Tunnel Selection Mode is set to Auto Select, the U2000 Web LCT selects automatically the tunnel for carrying a PW based on the tunnel priority set in Tunnel Automatic Selection Policy.