Configuring Bound Paths

You can set the bandwidth and direction of a VCTRUNK by setting a bound path.

Prerequisites

The Ethernet board must be created.

Context

NOTICE:

Configuring the bound path may interrupt services, and deleting the bound path interrupts services.

Procedure

  1. In the NE Explorer, select an Ethernet board and choose Configuration > Ethernet Interface Management > Ethernet Interface from the Function Tree. Click the Internal Port option button.
  2. Click the Bound Path tab. Click Configuration, and the Bound Path Configuration dialog box is displayed.
  3. Select the VCTRUNK port you want to bind from Configurable Ports. Select the bearer layer path from the Available Bound Paths combo box. Click .

    NOTE:
    Refer to the actual service requirement to select the level of the bound path. For example, if you want to configure 10 Mbit/s services, select VC12-xv. To configure 100 Mbit/s services, select VC3-xv.

  4. Click OK. A dialog box is displayed.
  5. Click OK.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.