You can modify the wrong settings when creating the NEs
on the Web LCT. For example, modify the NE Name, delete
the board and so on.
Modifying the NE Name
You can modify the NE name as needed, which does not affect the running of the NE.
Modifying the NE ID
Modify the NE ID according to the engineering plan to ensure that each NE ID is unique. The modification does not affect services.
Modifying the IP Address of an NE
After modifying the NE ID, you can modify the IP address of an NE based on the engineering planning. Modifying the IP address of an NE does not affect services, but modifying the IP address of a gateway NE affects the communication between the Web LCT and the NEs.
Deleting Boards
To modify board configurations for an NE, you can delete boards from the NE Panel.
Deleting Fibers
During the adjustment of the network, if you need to delete the NEs or change the links between NEs, you need to delete the fiber connections between the NEs.
Deleting an NE
When you need to adjust the network topology or have created a wrong NE, you can delete the NE from the Web LCT. Deleting an NE removes all information of the NE from the Web LCT but does not affect the running of the equipment.
Modifying Ports
The client-side port and line-side ports of the OTU board in the NG WDM can be a color port or a grey port. Set the port type based on the small form-factor pluggable (SFP) optical module used in the equipment. Set the port type based on the small form-factor pluggable (SFP) optical module used in the equipment.