Set the Working Mode of a Test Board

You can perform the FC service test only when the test board is set to Test Mode.

Prerequisites

The test board 12LOM must be created.

Procedure

  1. In the NE Explorer, select a board and choose Configuration > FC Service Test from the Function Tree.
  2. Click the Setting tab.
  3. Set the working mode of the port for the FC test to Testing Mode.
  4. Click Apply.

Follow-up Procedure

After the working mode of the test board is set to Testing Mode, you can set the parameters of FC service test on the board.

Parent topic: Configuration of the FC Service Test
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.