Configuring the SSM Output

If the standard SSM or extended SSM protocol is enabled, the clock signals carry SSM messages automatically. You can prevent clock sources from sending SSM messages to other clock subnets. This helps you to ensure that the equipment of different clock subnets does not affect each other at the edge of clock networks.

Procedure

  1. In the NE Explorer, select an NE and choose Configuration > Clock > Physical Clock > Physical Clock Subnet Configuration from the Function Tree.
  2. Click the SSM Output tab.
  3. Set the Control Status of the clock source.
  4. Click Apply. In the Operation Result dialog box, click Close.
Parent topic: Configuring Physical Clock
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.