This section describes the configuration process related to wavelength grooming. Before configuring wavelength grooming based on the configuration flow, complete the basic configuration of NEs according to the configuration flow of creating a network.
| Configuring Mode | Task Name | Task Description |
|---|---|---|
Creating Single-Station Optical Cross-Connection NOTE:
The inter-board service route can be established by creating the ne-level optical cross-connection. |
1.Creating Fibers | Required If the single-station cross-connection is configured, the logic fiber connection between NEs must be created on the NM and between boards that are inside the NEs must be created on the Web LCT. |
| 2.Configuring the Edge Port | Optional Configure the edge port before creating the ne-level optical cross-connection. Omit this task if the port where the optical cross-connection needs to be configured is a fixed edge port. |
|
| 3.Creating NE-Level Optical Cross-Connection | Required The inter-board service route can be established by creating the single-station optical cross-connection. |
|
| Creating Single-Board-Level Optical Cross-Connection NOTE:
The intra-board service route can be established by creating the board-level optical cross-connection. |
||