Alarm Group

In this user interface, you can set Ethernet port alarm data. You can set whether to enable reporting and monitoring, and set the upper/lower threshold of alarm count.

Navigation Path

In the NE Explorer, click the Ethernet board and select Performance > RMON Performance from the Function Tree. Click the Alarm Group tab.

Parameters

Field	Value	Description
Port/Path	Equipment that supports the master and slave shelf management: NE name-shelf ID(shelf name)-slot number-board name-port number(port name) Equipment that does not support the master and slave shelf management: NE name-slot number-board name-port number(port name)	The port or path of the alarm.
Alarm Name	For example: DropEvent	Monitors alarms of the port by the Ethernet service type.
Sampling Interval(s)	5 to 600	The period of sampling the port data.
Report Mode	Report ALL Report in Case of Lower Threshold-Crossing Report in Case of Upper Threshold-Crossing	Sets whether to report alarm when the alarm number exceeds the upper or lower threshold, or report at any alarm.
Upper Threshold	1 to 4294967295	Sets the upper threshold of alarm count.
Lower Threshold	0 to 4294967294	Sets the lower threshold of alarm count.
Monitor Status	Enabled, Disabled Default: Disabled	Sets whether to monitor.