Unicast Tunnel Management

Static Tunnel
As a transmission technology, the multi-protocol label switching (MPLS) can realize transparent transmission of data packets among users. The MPLS tunnel is the tunnel defined in the MPLS protocol. Independent from the service, the MPLS tunnel realizes the end-to-end transmission and carries the PWs related to the service.
Tunnel MEP
In this user interface, you can set and query the maintenance entity group end point (MEP) parameters of MPLS-TP tunnel operation, administration, and maintenance (OAM).
Tunnel MIP
In this user interface, you can set and query the maintenance intermediate point (MIP) parameters of the MPLS-TP Tunnel operation, administration and maintenance (OAM).
Ping Test
Ping tests detect the connectivity between the source and sink of a tunnel.
Traceroute Test
Detects the connectivity between any two neighboring nodes on a tunnel. A traceroute test checks the node connectivity by returning the response packets of each node on the tunnel.
FDI
In this user interface, you can enable or disable the FDI. If you enable the FDI, the equipment can send the FDI packets; if you disable the FDI, the equipment stops sending the FDI packets.

Parent topic: MPLS Management