QoS Information

In this interface, you can query the general attributes related to the QoS of the PW.

Navigation Path

In the NE Explorer, select the NE and choose Configuration > Packet Configuration > MPLS Management > PW Management from the Function Tree. Then, click the QoS Information tab.

Parameters

**Table 1** Descriptions of the parameters for QoS Information
Field	Value	Description
PW ID	Example: 5	Display the PW ID.
Direction	Ingress, Egress	Display the direction of the PW.
Bandwidth Limit	Enabled, Disabled	Display the bandwidth limit of the PW. If Bandwidth Limit is enabled, Committed Information Rate and Peak Information Rate can be set.
CIR (kbit/s)	-	Display the committed information rate of the PW.
CBS (byte)	-	Display the committed burst size.
PIR (kbit/s)	-	Display the peak information rate of the PW.
PBS (byte)	-	This parameter is not supported.
Maximum Burst Size (byte)	-	Display the maximum burst size.
EXP	None, 0, 1, 2, 3, 4, 5, 6, 7	Display the ingress PW priority. The number 7 indicates the highest priority.
Policy	Example: 5	Display the QoS policy of the PW.
LSP Mode	Uniform, Pipe	Display the LSP mode. Uniform: The CoS of user packets should be recovered when the tunnel label is stripped. Pipe: The CoS of user packets need not be recovered when the tunnel label is stripped. When the direction of the PW is Egress, you can set the LSP mode.