Flow Control

In this interface, you can query and set the flow control of the Ethernet interface.

Navigation Path

In the NE Explorer, click the NE and choose Configuration > Packet Configuration > Interface Management > Ethernet Interface from the function tree. Then, click the Flow Control tab.

In the NE Explorer, click the board and select Configuration > Interface Management > Ethernet Interface from the Function Tree. Then, click the Flow Control tab.

Parameters

**Table 1** Descriptions of the parameters for Ethernet interface Flow Control
Field	Value	Description
Port	For example: Slot-Board Name-Port (Port No.)	Display the port name.
Auto-Negotiation Flow Control Mode	Disabled, Enable Dissymmetric Flow Control, Enable Symmetric Flow Control, Enable Symmetric/Dissymmetric Flow Control	If the working mode of the port is auto-negotiation, you can only choose the auto-negotiation flow control mode. Enable Dissymmetric Flow Control: The port send PAUSE frames only, not receive. Enable Symmetric Flow Control: The port send and receive PAUSE frames. Enable Symmetric/Dissymmetric Flow Control: The port determine a flow control mode (symmetric or dissymmetric).
Non-Autonegotiation Flow Control Mode	Disabled, Enable Symmetric Flow Control, Send Only, Receive Only	If the working mode of the port is non-autosensing, you can only choose the non-autonegotiation flow control mode. Enable Symmetric Flow Control: The port can both transmit and receive PAUSE frames. Send Only: The port can only send PAUSE frames. Receive Only: The port can only receive PAUSE frames.
Force autonegotiation flow control mode	10M Half_Duplex, 10M Full_Duplex, 100M Half_Duplex, 100M Full_Duplex, 1000M Half_Duplex, 1000M Full_Duplex	Set the mode of autonegotiation flow control.