Protocol Config

In this interface, you can set and query the protocol configuration.

Navigation Path

In the NE Explorer, choose Configuration > Packet Configuration > Ethernet Protocol Configuration > IGMP Snooping Configuration from the navigation tree. Then, click the Protocol Config tab.

Button Description

Button	Description
Add	Adds a quickly delete member port.

Parameter Description

Parameter	Value	Description
Service ID	Example: 5	Indicates the service ID.
Enabled Protocol	Disabled, Enabled Default: Disabled	Specifies whether a protocol is enabled.
Router Port Aging Time(min)	1-120 Default: 8	Indicates the aging time for the multicast router port.
Max. Nonresponse Times from Multicast Members	1-4 Default: 3	Indicates the maximum non-response times of multicast group members.
Max. Multicast Groups	Example: Unlimited	Indicates the maximum number of multicast groups. The number of static multicast groups and the number of members should not be larger than the maximum number set by the user.
Max. Multicast Members	Example: Unlimited	Indicates the maximum number of multicast group members.
Actual Multicast Group Count	Example: 2	Indicates the number of actual multicast groups.
Actual Multicast Members Count	Example: 3	Indicates the number of actual multicast members.
VLAN ID	Example: 5	Indicates the VLAN ID of the service.
Port Type	V-UNI, V-NNI	Indicates the type of a port traversed by the service. V-UNI: user-side port. V-NNI: network-side port.
Port	Example: 21-N1PETF8-2(PORT-2)[55]	Indicates the port name.
Static and Dynamic IGMP Router Port Coexist	Enabled, Disabled	Specifies whether to allow static and dynamic IGMP router ports to coexist. If this function is enabled, dynamic router ports can be learned.