Tunnel MIP

In this user interface, you can set and query the maintenance intermediate point (MIP) parameters of the MPLS-TP Tunnel operation, administration and maintenance (OAM).

Navigation Path

In the NE Explorer, select an NE and choose Configuration > Packet Configuration > MPLS Management > Unicast Tunnel Management from the Function Tree, Click the MPLS-TP OAM tab, then click the MIP tab.

Parameter Description

**Table 1** MIP parameters
Parameter	Value	Description
Tunnel ID	Example: 3	Indicates the tunnel id.
Tunnel Name	String	Indicates the name of a tunnel.
Node Type	Transit	Indicates the type of a node.
Tunnel Direction	Bidirectional, Unidirectional	Indicates the direction of a tunnel.
MEG ID Type	ICC Based, Customer Based	ICC Based: Indicates the MEG ID type defined by the Y.1731 recommendation. Customer Based: Indicates the MEG ID type used for interconnection with equipment from special operators. The MEG ID Type must be the same at the source and the sink ends.
MEG ID	Example:3	Indicates the MEG ID. MEG ID varies with MEG ID Type. When MEG ID Type is set to ICC Based, MEG ID is a character string with letters and numbers, and contains 1 to 13 bytes. When MEG ID Type is set to Customer Based, MEG ID consists of 96 characters that represent 48 hexadecimal numbers. The default value is a character string consisting of 96 zeros. You can set MEG ID to any character strings that consist of only letters (a-f) and digits (0-9).
MIP ID	1 to 8191	Indicates the ID of the MIP. Only one MIP can be created for a transit tunnel. The MIP ID uniquely identifies an MIP.