In this user interface, you can start the spanning tree protocol to effectuate the spanning tree parameters, and reset the spanning tree.
In the NE Explorer, select the board and choose . Click the Protocol Enabled tab.
Button |
Description |
|---|---|
Fast config |
Completes the fast configuration of parameters through the fast configuration wizard. |
Protocol Reset |
Resets the STP and RSTP. |
Field |
Value |
Description |
|---|---|---|
VB |
VB ID-VB Name |
Displays a VB. |
Protocol Enabled |
Enabled, Disabled Default: Disabled |
Sets the protocol enable status. |
Protocol Type |
STP, RSTP Default: RSTP |
Sets the protocol type. |