In this user interface, you can set the parameters of the spanning tree.
In the NE Explorer, click the board and select . Click Fast config.
Field |
Value |
Description |
|---|---|---|
VB |
VB ID-VB Name |
Displays the VB ID and VB name. |
Protocol Enabled |
Enabled, Disabled Default: Disabled |
Protocol enable status. |
Protocol Type |
STP, RSTP |
Sets the protocol type. |
Bridge Priority |
For example: 32768 |
Displays the bridge priority. The smaller the value is, the higher the priority is. |
Port |
For example: 2 |
Displays the port ID. |
Port Priority |
For example: 128 |
Displays or sets the port priority. |