In this user interface, you can manage link path through (LPT).
Navigation Path
In the NE Explorer, click the board and choose from the Function Tree.
NOTE: Set LPT for the port for which you configure transparently transmitted EPL services.
Buttons
Button |
Description |
|---|---|
PtoMP LPT |
Used for configuring point-to-multipoint LPT. |
Parameters
Field |
Value |
Description |
|---|---|---|
Port |
For example: PORT1 |
The external port of board. |
VCTRUNK Port |
For example: VCTRUNK1 |
The VCTRUNK port where EPL services are transparently transmitted. |
Direction |
Positive, Reverse |
The direction of the EPL services that are transparently transmitted. The direction is Positive if the source port is a PORT port and the sink port is a VCTRUNK port. The direction is Reverse if the source port is a VCTRUNK port and the sink port is a PORT port. |
LPT |
Yes, No |
Sets whether to use LPT. |
Bearer Mode |
Ethernet, GFP(HUAWEI), GFP(CSF) |
The bearer mode of LPT frames. |
Port-Type Port Hold-Off Time (ms) |
0 to 10000 |
If LPT switching is enabled, the port notifies the opposite end after the hold-off time. |
VCTRUNK Port Hold-Off Time (ms) |
0 to 10000 |
If LPT switching is enabled, the port notifies the opposite end after the hold-off time. |