In this user interface, you can set and query advanced attributes for an external port.
In the NE Explorer, select a board and choose from the Function Tree. Select the External Port and then click the Advanced Attributes tab.
Field |
Value |
Description |
|---|---|---|
Port |
PORTn |
Displays the PORT port. The letter n indicates the port number. |
Transmitting Rate (kbit/s) |
For example: 1000 |
Displays the transmitting rate of the port. |
Receiving Rate (kbit/s) |
For example: 1000 |
Displays the receiving rate of the port. |
Broadcast Packet Suppression |
Disabled, Enabled Default: Disabled |
Enables or disables broadcast packet suppression. |
Broadcast Packet Suppression Threshold |
10% to 100% |
When the broadcast packet suppression function is enabled, if the broadcast packet occupies a bandwidth that exceeds the overall bandwidth of the port x the suppression threshold, the broadcast packet is suppressed. |
Synchronous Clock Enabled |
Disabled, Enabled |
Sets wether to enable synchronous clock of the port. |
Threshold of Port Receiving Rates (Mbit/s) |
0 to 1000 |
The Threshold of Port Receiving Rates (Mbit/s) (External Ethernet Port Attribute) parameter specifies the data flow threshold at external physical ports.
NOTE:
In the case of TBE, this parameter is supported. |
Port Rates Time Slice (Min) |
0 to 300 |
Sets rates time slice for the external port.
NOTE:
In the case of TBE, this parameter is supported. |
Loop Detection |
Disabled, Enabled Default: Disabled |
Sets whether to enable loop detection, which is used to check whether a loop exists at the port. |
Loop Port Shutdown |
Enabled, Disabled |
Sets whether to enable shutdown of a loop port, which is used to set blocking for a loop port. |