Spectrum Analysis Board

Optical Interface/Channel

• Equipment that supports the master and slave shelf management: NE name-shelf ID(shelf name)-slot number-board name-port number(port name)
• Equipment that does not support the master and slave shelf management: NE name-slot number-board name-port number(port name)

Displays the current optical port/path location.

Optical Interface Name

For example: RO1

Do not modify this field. Use the default value.

Optical Monitoring

Enabled, Disabled

Enables or disables the spectrum analysis of the path.

Actual Band

C

Displays the optical band that the path is monitoring.

Actual Working Band Parity

Even, Odd

Currently only even band is supported.

Configure Band

C

Configures the optical band that the path monitors.

Configure Working Band Parity

Even, Odd

Displays the parity of the current working band of the port. Currently only parity band is supported.

Optical Switch No

1 to 8

The MCA board can access eight optical signals. To select one optical port to perform spectrum analysis, you need to know the analyzed optical port No. of the board, that is, the optical switch status or the optical switch number.

Monitor Interval (min)

5 to 49995

Default: 10

Sets the time interval of performance monitoring on the board.

Wavelength Monitor Status

Monitor, No Monitor

Default: Unmonitored

Sets whether to monitor the port.

Band

For example: C

Displays the band.

WDM Type

NRZ or DRZ, 100-GHz Spacing with CRZ, 50-GHz Spacing with CRZ

Sets the WDM type.

Optical Performance Monitoring

Disabled, Enabled

Default: Disabled

Sets whether to enable performance monitoring function.

Threshold of Power Equilibrium Deviation(dB)

0.1 to 25.4

Sets the threshold of power equilibrium deviation.