WDM Service Configuration

In this user interface, you can query and configure the timeslots of an electrical cross-connection.

Navigation Path

In the NE Explorer, click an NE and choose Configuration > WDM Service Configuration from the Function Tree. Click the WDM Service Configuration tab.

Buttons

Button		Description
Query		Queries configured services of the NE and the service status from the NE.
Apply		Applies the configuration to the NE.

Parameters

**Table 1** Timeslot service parameters
Field	Value	Description
Port	Equipment that supports the master and slave shelf management: NE name-shelf ID(shelf name)-slot number-board name-port number(port name)-channel number Equipment that does not support the master and slave shelf management: NE name-slot number-board name-port number(port name)-channel number	Displays the port the WDM services occupied.
Service Type	STM-1, STM-4, STM-16, STM-64, STM-256, OC-3, OC-12, OC-48, OC-192, OC-768, OTU1, OTU2, Fast Ethernet (FE), Gigabit Ethernet (GE), GE(GFP-T), 10GE WAN, 10GE LAN, ESCON, FICON, FICON Express, FC50, FC100, FC200, FC400, FC800, FC1200, DVB-ASI, DVB-SDI, FDDI, HDTV, Any	Displays the cross-connection type.
Service Rate (0.1M)	For example: 1250	Displays the cross-connection rate.
Send Timeslots	1 to 16	Sets the send timeslots of the cross-connection.
Receive Timeslots	1 to 16	Sets the receive timeslots of the cross-connection.
Timeslot Configuration Mode	Manual, Automatic Default: Automatic	Set the timeslot configuration mode. Manual: Manually set the transmit and receive timeslots. Automatic: The system automatically allocates the transmit and receive timeslots that cannot be changed.