In this user interface, you can view and set NE attributes, including NE ID, shelf type, and IP address.
In the NE Explorer, select an NE and choose from the Function Tree.
Button |
Description |
|---|---|
Modify NE ID |
Modify the value of NE ID or extended ID.
NOTICE:
This operation may cause communication interruption between the NE and Web LCT. |
Clear Smoke Alarm |
Clears smoke alarms of an outdoor rack. |
Field |
Value |
Description |
|---|---|---|
Type |
For example: OptiX OSN 3800 |
Displays the type of an NE. |
ID |
For example: 1 |
Displays the unique ID of an NE on the NM for identifying an NE, which is the basis of communication between the NM and an NE. |
New ID |
For example: 1 |
Sets the new ID of an NE on the NM for identifying an NE, which is the basis of communication between the NM and an NE. |
Extended ID |
1 to 255 Default: 9 |
For NE ID extension. |
New Extended ID |
1 to 255 Default: 9 |
Sets the new extended ID of an NE,For NE ID extension. |
Name |
For example: NE70 |
Displays the NE name, for the convenience of searching for the NE. |
Remarks |
- |
Enters extra notes of the NE if desired. |
Subrack Type |
1U Shelf, 2U Shelf, 1U Air Convection Shelf For example: Standard Shelf |
Displays the shelf type of an NE. |
Gateway Type |
IP Gateway, Serial Port, USB |
Displays the gateway type of an NE decides the mode of communication between the NE and the NM. |
Affiliated Gateway IP Address |
For example: 10.71.82.94 |
Selects the address of the GNE to which the created NE is associated. |
Affiliated Gateway Port |
Default: 1400 |
Displays the port of the GNE to which an NE is associated. |
ASON Feature Enabled |
Checked, Unchecked |
Displays whether the ASON feature is enabled. |
Outdoor Cabinet Type |
NULL, APM30 AC, APM30 DC, OMB AC, OMB DC |
Sets the type of outdoor cabinet. |
OLS Trigger Flag |
Disabled, Enabled Default: Disabled |
Sets whether to enable the optical layer monitoring function. |
Software Version (VRC) |
For example: V100R005C00 |
Displays the software version of the NE. |
Backplane Bus Mode |
Standard Mode(1G), Extended Mode(2.5G) |
Indicates the interaction rate of NE backplane lines. The interaction rate depends on the chip capabilities on the main control board. |